roller shutter door

1. Automatic protection for damaged areas. Galvanized coatings corrode preferentially to steel, providing cathodic or sacrificial protection to small areas of steel exposed through damage. Unlike organic coatings, small damaged areas need no touch up. 2. Lowest first cost. Galvanizing is lower in first cost than many other commonly specified protective coatings for steel. (The application cost of labour intensive coatings such as painting has risen far more than the cost of factory operations such as galvanizing.) 3. A full protective coating can be applied in minutes; The galvanizing process is not dependent on weather conditions

1. Long life. The life expectancy of galvanized coatings on typical structural members is far in excess of 50 years in most rural environments, and 20 to 25 years plus, even in severe urban and coastal exposure. 2. Complete protection. Every part of a galvanized article is protected, even recesses, sharp corners and inaccessible areas. No coating applied to a structure or fabrication after completion can provide the same protection. 3. Lowest first cost. Galvanizing is lower in first cost than many other commonly specified protective coatings for steel. (The application cost of labour intensive coatings such as painting has risen far more than the cost of factory operations such as galvanizing.)

1. Faster erection time. As galvanized steel members are received they are ready for use. No time is lost on-site in surface preparation, painting and inspection. When assembly of the structure is complete, it is immediately ready for use, or for the next construction stage. 2. Lowest first cost. Galvanizing is lower in first cost than many other commonly specified protective coatings for steel. (The application cost of labour intensive coatings such as painting has risen far more than the cost of factory operations such as galvanizing.) 3. Complete protection. Every part of a galvanized article is protected, even recesses, sharp corners and inaccessible areas. No coating applied to a structure or fabrication after completion can provide the same protection.

1, Security / burglarproof. our aluminum rolling shutter doors are made of 6063 aluminum which meet the industry standard requirement, so once you have chosen an aluminum roller shutter door, it means that you have chosen security and burglarproof. 2, Noiseless. With rubber strip for noise reduction in between two aluminum slats, this allow the doors run more quietly during close up and down. 3, Rust-proof. Made of aluminum, it makes the roller shutter door never get rust, even in bad weather.

Superior visibility. Better than any other type of roller shutter doors. UV-Stabilized and Sun resistant. 80% of the ultraviolet will be resisted and retains its transparency for many years. High impact-resistance. Can withstand the impact of a car driving into it with 30 miles an hour.

Superior visibility. Better than any other type of roller shutter doors. High security and exceptional strong. As strong as steel roller shutter doors. UV-Stabilized and Sun resistant. 80% of the ultraviolet will be resisted and retains its transparency for many years. High impact-resistance. Can withstand the impact of a car driving into it with 30 miles an hour.

1. Reliability. Galvanizing is carried out to Australian / New Zealand Standard 4680, and standard, minimum coating thicknesses are applied. Coating life and performance are reliable and predictable. 2. Automatic protection for damaged areas. Galvanized coatings corrode preferentially to steel, providing cathodic or sacrificial protection to small areas of steel exposed through damage. Unlike organic coatings, small damaged areas need no touch up. 3. Complete protection. Every part of a galvanized article is protected, even recesses, sharp corners and inaccessible areas. No coating applied to a structure or fabrication after completion can provide the same protection.

Easy and Cost effective Repairing Heeho is manufactured section technology so each sections can be replaced individual if a parts is tear or damaged no need to replace all fabric ,System doesn’t has spring or side zip system.System can be cleaned with water easily it is most important properties for high hygiene required area. Perfect for hygienic area high speed roll up doors is designed with very low gap to avoid dust collections fully aluminum body and hygienic fabric is meet with all clean room area and applications. 7/24 Operations Strong and flexible design of Heeho high speed doors can be operated 24 X 7 specially by choosing high resistance fabric and gearbox system for continuous operations.Crash resistant system installed in our doors help to reassemble the fabric with in no time in case of accident.

Low Maintenance Heeho doors cause of design no need any special maintenance all parts is carefully chosses for no maintenance requirements also avoid using welding at the system so never faced problem cause of welded parts. Sealing Properties Door compact design supply to you also excellent sealing.All structure made from Aluminum and no welding also no gap to resistance moisture,acids,animal fats,rodents,insects and salt solutions,Speed Flex High Speed Roll up doors works in Dusty,Dirty,Grimy Environments,This is design for noiseless operations. 7/24 Operations Strong and flexible design of Heeho high speed doors can be operated 24 X 7 specially by choosing high resistance fabric and gearbox system for continuous operations.Crash resistant system installed in our doors help to reassemble the fabric with in no time in case of accident.